ccie security bootcamp page

Current ccie security bootcamp News

Chapter 1 Summary:

Wed, 18 Jun 2008 05:36:14 +0000
Chapter 1: Cisco Unified Communications Manager Architecture
Chapter 1 is just an overview of Cisco Unified Communications Manager (CUCM).
The purpose of the Unified Communications network is to integrate voice, video, and data over a single network infrastructure.
Like everything else in the networking world, CUCM is built and based upon a set of standard layers.

Infrastructure Layer: ...]


When using PIM Sparse in NBMA environment like Frame Relay you need to make sure you enter the ip pim nbma command to disable the split horizon rule that traffic coming into the interface is not going out that same interface.

The IP pim nbma is working only for Sparse Mode Group

Candidate RP need to be able to communicate only with the mapping agent and the Routers in the Domain need to be able to communicate with the Mapping agent so from that we can understand that we need to watch our Route to the Mapping Agent.

Ok I think I will end it here for now, I hope this was good info.

Alias huntgroups in SRST

Sun, 27 Aug 2006 16:13:04 +0000
Have phones 2001,2002,2003 in SRST mode in a router. Calls coming into the system from PSTn should hit 2001 first and then on 2003.
 alias 1 6175222001 to 2001 preference 1 cfw 2003 timeou 4 huntstop
 alias 2 6175222002 to 2001 preference 1 cfw 2003 timeout 4 huntstop
 alias 3 6175222003 to 2001 preference 1 cfw 2003 timeout ...]

This article on ccie security bootcamp is supposed to be very useful to one seeking more information on ccie security bootcamp. Do you think so?


Recommended ccie security bootcamp Items



Get the latest in mobile software for your Nokia N95 at Handango!


ccie lab blue print
ccie rack